Best MagSafe Battery Pack for iPhone, Apple Watch & AirPods

TL;DR: Most MagSafe battery packs — including Apple's own — cannot wirelessly charge Apple Watch, and none of them charge all three Apple devices (iPhone, Apple Watch, and AirPods) without cables or extra adapters. PETL is the only coin-slim, circular battery pack engineered to do exactly that: snap magnetically to your iPhone and wirelessly top up your Watch and AirPods too, no wall outlet required. If you carry all three Apple devices and want one pocketable solution, PETL is the answer.

Why Finding a MagSafe Battery Pack That Charges Apple Watch and AirPods Is So Hard

Search for "MagSafe battery pack that charges Apple Watch and AirPods" and you'll find a surprising content gap: nearly every roundup focuses on iPhone charging speed and capacity, then quietly mentions that Apple Watch support is missing or limited. That gap exists because most shoppers don't realize how few battery packs actually support all three devices — and because Apple's own packs have real limitations that nobody talks about plainly.

Here's the honest situation in 2025:

• Apple's original MagSafe Battery Pack cannot charge Apple Watch at all — wirelessly or otherwise. It is an iPhone-only accessory.
• Apple's newer MagSafe Battery Pack for iPhone Air can charge Apple Watch, but only via a wired USB-C workaround — not wirelessly — and it is only compatible with the iPhone Air, not the broader iPhone 12–16 lineup.
• Most third-party battery packs skip Apple Watch support entirely, treating it as an afterthought.

The result: if you wear an Apple Watch and use AirPods every day, you are currently carrying a charger for each device, hunting for outlets at airports, and making peace with a bag that's heavier than it needs to be.

That's the problem PETL was built to solve.

What Makes a Battery Pack Truly Compatible with the Full Apple Ecosystem?

Before diving into the PETL, it helps to understand what "charging all three Apple devices" actually requires from a hardware standpoint.

Charging iPhone via MagSafe

iPhone 12 through iPhone 16 models all support MagSafe — Apple's magnetic alignment system that lets a charger snap securely to the back of the phone and begin wireless charging automatically. A MagSafe-compatible battery pack uses the same magnetic ring geometry and the Qi wireless standard to deliver power without cables. Look for N52-grade neodymium magnets for a secure hold that doesn't slide off in your pocket.

Charging Apple Watch Wirelessly

Apple Watch uses its own magnetic inductive charging — a small circular pad that the Watch's flat back snaps onto. A battery pack that charges Apple Watch needs a dedicated Qi wireless output surface or a built-in Watch charging puck, separate from the iPhone charging pad. This is why most MagSafe packs can't do it: they only have one Qi output designed for a phone footprint, not the smaller Watch coil.

Charging AirPods Wirelessly

AirPods (with a wireless charging case) and AirPods Pro charge via standard Qi wireless. Practically any Qi output surface can top up an AirPods case — so this is the easiest of the three. The challenge is finding a battery pack that handles all three simultaneously and still fits in a pocket.

Introducing PETL: The Only Pocketable Disc That Charges All Three

PETL is a circular, MagSafe-compatible battery pack with a design unlike anything else in the category. Where competitors make rounded rectangles that look like miniature bricks, PETL is a perfectly round disc — CNC-machined aluminum with a tempered glass top — that feels more like a premium accessory than a gadget you tolerate.

Snap it to the back of your iPhone (iPhone 12 through iPhone 16), set your Apple Watch on top, and drop your AirPods case anywhere on the Qi surface. PETL handles the rest. No cables. No apps. No setup. Your iOS battery widget even shows PETL's charge level automatically, the same way it shows AirPods and Apple Watch.

This is what a portable charger for iPhone, Apple Watch, and AirPods should look and feel like.

PETL vs. PETL 2 Plus: Which Size Is Right for You?

PETL comes in two sizes, and choosing between them is straightforward once you know your usage pattern.

The Original PETL — 3,000 mAh

At 70mm wide and just 14mm thin, the original PETL is the definition of everyday carry. It is built for the person who needs confident top-ups throughout the day — enough to keep your iPhone well above zero from morning to evening, with plenty left over for Apple Watch and AirPods. Up to 10 extra hours of talk time. It slips into a jeans pocket without a second thought and delivers Qi wireless charging with USB-C passthrough.

Priced at $64.95, it is the right choice for commuters, light-to-moderate iPhone users, and anyone who wants the absolute smallest footprint without sacrificing true three-device coverage.

PETL 2 Plus — 5,000 mAh

The PETL 2 Plus is the evolved, second-generation model. At 72.5mm wide and 16.2mm thin, it is barely larger than the original — you would not notice the difference in a pocket — but it packs 5,000 mAh of high-density lithium polymer capacity. That translates to up to 15 extra hours of talk time and enough power to deliver a near-full iPhone recharge plus Watch and AirPods top-ups in a single outing.

The PETL 2 Plus supports 15W Qi wireless charging and USB-C passthrough, and it is finished in a vibrant Cosmic Orange or refined Slate anodized aluminum with a tempered glass top. Strong N52 neodymium magnets ensure a secure magnetic snap every time. It shows up in your iOS battery widget automatically.

Priced at $89.95, the PETL 2 Plus is the best portable charger for Apple ecosystem users who travel, work long days, or simply want the confidence of knowing they will never hit zero on any device.

Head-to-Head: PETL vs. Apple's MagSafe Battery Packs

It's worth being direct about how PETL compares to Apple's own options, because this is where the content gap in search results does real harm to shoppers.

• Apple's original MagSafe Battery Pack: Charges iPhone only. No Apple Watch support, wireless or otherwise. No AirPods surface. If you wear a Watch, this pack does not solve your problem.
• Apple's MagSafe Battery for iPhone Air: Adds Apple Watch charging, but only as a wired USB-C workaround — not wireless — and only works with the iPhone Air. If you have an iPhone 15 Pro, an iPhone 16, or any other model, this pack is not for you.
• PETL / PETL 2 Plus: Wirelessly charges iPhone 12 through 16, Apple Watch (Qi-compatible models), and AirPods. No cables, no workarounds, no device restrictions beyond standard MagSafe compatibility. One disc. Three devices.

Real-World Scenarios Where PETL Changes Everything

The Daily Commute

Your iPhone is at 40% when you leave the office. Your Apple Watch has been tracking your activity all day and is nudging toward low battery. Your AirPods are nearly dead from back-to-back calls. One PETL in your jacket pocket handles all three on the train home — silently, wirelessly, without you digging for cables.

The Airport and Long-Haul Travel

The PETL 2 Plus's 5,000 mAh means you skip the outlet scramble at the gate. iPhone, Watch, and AirPods all topped up before you board. The disc stays in your pocket the entire time — no tray table required, no bag rummaging. And at just 72.5mm wide, it clears TSA without the side-eye larger battery bricks sometimes attract.

The All-Day Event

Music festival, trade show, hiking trail, theme park — anywhere you are on your feet all day, away from outlets, with all three Apple devices working hard. PETL snaps to your iPhone and keeps everything alive without adding a second bag to your carry.

The Nightstand

PETL works equally well as a bedside charging station. Set your iPhone on top, rest your Watch beside it, drop your AirPods case on the surface. Everything charged by morning without a single cable.

Who PETL Is NOT For (Honest Guidance)

PETL earns its place in your pocket by being honest about what it is not. If you need maximum raw capacity — if you are a heavy power user who wants to charge from zero to full twice in a row, every day — a large 10,000 mAh or 20,000 mAh power brick will serve you better. Those exist. They are bulkier, heavier, and do not snap magnetically to your iPhone, but they offer capacity that PETL's pocketable form factor does not try to match.

PETL is for the person who wants confident, stylish, cable-free top-ups across all three Apple devices without adding a second bag or a brick to their carry. If that's you, there is no better option on the market.

The Design Philosophy Behind the Disc

Most battery packs are designed to store energy. PETL was designed to disappear into your life. The circular form factor is not a gimmick — it mirrors the shape of Apple Watch, the roundness of MagSafe itself, and the visual language of accessories you actually choose to carry rather than gadgets you reluctantly tolerate.

CNC-machined aluminum and tempered glass put PETL in the same material conversation as the devices it charges. Available in multiple colorways — Natural, Black, Blush Gold, Sahara Gold, Lavender, Sky, and the PETL 2 Plus exclusive Cosmic Orange and Slate — it is the first battery pack that feels like a considered part of your Apple setup, not an afterthought.

N52 neodymium magnets provide a secure hold that does not slip off mid-charge. The iOS battery widget integration means you always know how much power PETL has left without opening any app. USB-C passthrough lets you recharge PETL itself at a desk or in a car while it simultaneously charges your iPhone.

The Bottom Line: The Best Portable Charger for the Full Apple Ecosystem

If you carry an iPhone, Apple Watch, and AirPods every day — and the vast majority of Apple users do — you deserve a portable charger that actually covers all three. Apple's own MagSafe packs do not do this wirelessly. Most third-party packs do not either. PETL does, in a form factor slim enough to forget you are carrying it.

The original PETL (3,000 mAh, priced at $64.95) is the everyday carry champion. The PETL 2 Plus (5,000 mAh, priced at $89.95) is the travel and long-day upgrade. Both charge iPhone, Apple Watch, and AirPods. Both snap on magnetically. Neither requires cables, apps, or a second thought.

Explore both at gopetl.com — and stop carrying a bag of chargers.

Frequently asked questions

Can a MagSafe battery pack charge Apple Watch wirelessly?

Most MagSafe battery packs cannot charge Apple Watch — including Apple's original MagSafe Battery Pack, which is iPhone-only. PETL is a circular MagSafe-compatible battery pack specifically engineered to wirelessly charge iPhone, Apple Watch (Qi-compatible models), and AirPods from a single pocketable disc, with no cables or adapters required.

Does Apple's MagSafe Battery Pack charge Apple Watch or AirPods?

Apple's original MagSafe Battery Pack does not charge Apple Watch or AirPods at all — it is designed exclusively for iPhone. Apple's newer MagSafe Battery for iPhone Air can charge Apple Watch, but only via a wired USB-C connection (not wirelessly) and only works with the iPhone Air model. PETL charges all three devices wirelessly without any cable workarounds.

What is the best portable charger for iPhone, Apple Watch, and AirPods together?

PETL is widely regarded as the best portable charger for the full Apple ecosystem because it is the only coin-slim, circular battery pack that wirelessly charges iPhone (12 through 16), Apple Watch, and AirPods simultaneously — with no cables, no apps, and no setup. It comes in two sizes: the original PETL (3,000 mAh) for everyday carry and the PETL 2 Plus (5,000 mAh) for travel and heavier use.

Is PETL compatible with all iPhone models?

PETL is MagSafe-compatible and works with iPhone 12 through iPhone 16 models, which all support MagSafe's magnetic alignment system. It snaps securely to the back of any compatible iPhone using N52 neodymium magnets and begins wireless Qi charging automatically.

How is the PETL 2 Plus different from the original PETL?

The PETL 2 Plus is the second-generation model, offering a larger 5,000 mAh capacity (versus 3,000 mAh in the original) and up to 15W Qi wireless charging. It is slightly larger at 72.5mm wide and 16.2mm thin compared to the original's 70mm width and 14mm thickness, but remains fully pocketable. Both models charge iPhone, Apple Watch, and AirPods wirelessly.

Does PETL show up in the iPhone battery widget?

Yes. Both the original PETL and PETL 2 Plus appear automatically in the iOS battery widget, so you can see PETL's remaining charge level alongside your iPhone, Apple Watch, and AirPods — without downloading any app or doing any setup.